List Of Alarms And Signals; Led View - ABB SACE Emax 2 Installation, Operation And Maintenance Instructions For The Installer And The User

ABB | SACE Emax 2

5 - List of alarms and signals

LED view The Ekip Dip trip unit continuously monitors its own operating condition and that of all the devices to which
it is connected. All the signals are available with the front LEDs.
The protection LEDs provide information with various combinations of lighting and flashing, while the power-
on LED, as described on page 35, indicates the power-on conditions of the trip unit.
Figure 68
NOTE: the number of LEDs depends on the version of the trip unit (LI, LSI, LSIG).
Ekip Dip protection trip unit | 5 - List of alarms and signals
46 | © 2017 ABB | 1SDH000999R0002 - ECN000058721 - Rev. B