Change Of Position Of The Vertical/Horizontal Terminals - ABB SACE Emax 2 Installation, Operation And Maintenance Instructions For The Installer And The User

Low voltage air circuit-breakers

Hide thumbs Also See for SACE Emax 2:

Table of Contents

ABB | SACE Emax 2

Change of position of the

If the circuit-breaker is supplied equipped with terminals of the horizontal/rear type, it is possible at any

moment to switch from horizontal to vertical and vice versa. (see Figure 61 and Figure 62). Lock the screws

vertical/horizontal terminals

with tightening torque 20 Nm - 177 lb in.

Figure 61

Figure 62

Emax E1.2 circuit-breakers | 6 - Installation

Table of Contents

Emax e1.2-a Emax e1.2