Advertisement
Using your machine
Using your machine
Place your foot onto the
floor head and pull handle
backwards to recline
Refreshing carpets
Place the microfibre pad
on the floor white side
facing up. Place steam
mop onto pad making
sure the entire pad
covers the floor head
Refreshing carpets
Plug into mains and slide
switch to on position.
The blue light will
illuminate to show power
on. The green light will
illuminate to show the
steam mop is ready to use
To produce steam,
squeeze the trigger.
To prevent over wetting
floors avoid holding the
trigger continuously
With microfibre pad attached, hook
steam mop into the font of the
carpet glider and push to clip into
place. Carpet glider should only be
used when refreshing carpets
To refresh carpets select off
setting on the detergent dial
Move the steam mop slowly
backwards and forwards paying
particular attention to high
traffic areas
Hide quick links:
Advertisement
