Poulan Pro 406281 Owner's Manual page 29

REPAIR PARTS
CHASSIS / ENGINE / PULLEYS
NOTE: All component dimensions given in U.S. inches.
IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
SNOW THROWER - MODEL PP11H30ES (96192001400)
KEY PART
NO. NO. DESCRIPTION
1 192873 Spring, Traction Idler
2 180522 Pulley, Idler (2-1/4)
3 - - - Engine, Tecumseh, Model Number LH358SA
(For engine service and replacement parts,
call Tecumseh Products at 1-800-558-5402)
4 74780520 Screw, Hex Head 5/16-18 x 1-1/4
6 59289 Washer, Flat
7 166785 Nut, Jam, Lock 5/16-18
8 175330 Pin, Idler Pivot
9 187788 V-Belt, Traction Drive
10 198552 Washer, Lock 5/16
11 198584 Screw, Hex Washer Head
5/16-18 x 1/2
12 179259 Impeller Arm / Pad Assembly
13 85179 Retainer, Hairpin
14 178828 Spring, Brake
15 408010 V-Belt, Impeller Drive
16 150406 Screw, Hex Head 3/8-16 x 1-1/4
17 187786 Arm, Idler
18 74780524 Screw, Hex Head 5/16-18 x 1-1/2
19 198559 Bushing, Idler Pivot
20 180523 Pulley, Idler (2-3/4)
21 74610516 Screw, Hex Head 5/16-18 x 1
22 179371 Spacer, Engine Pulley
23 180478 Pulley, Engine, Traction Drive
24 179157 Pulley, Engine, Impeller Drive
25 400026 Washer, Flat 3/8
26 850263 Washer, Lock 3/8
27 851084 Screw, Hex Head 3/8-24 x 1-3/8
28 193607 Guide, Belt
29 192213 Belt Cover Assembly
(Includes Toolbox Cover)
30 178830 Cover, Toolbox
31 405024 Screw, Hex Head 1/4-20 x 1/2
34 198580 Screw, Hex Head 1/4-28 x 3/4
35 405484 Arm, Auger Control
44 17000616 Screw, Hex Head 3/8-16
45 193397X479 Bracket, Pivot, Idler
46 187785X479 Pan, Frame Bottom
47 71020512 Screw, Hex Head 5/16-18 x 3/4
48 181156 Nut, Speed 5/16-18
49 404431X428 Frame Assembly
50 192115X428 Plate, Frame End
51 406109 Shaft, Auger Control
52 57079 Washer, Hardened
57 11050500 Washer, Lock, External Tooth 5/16
58 198563 Power Cord
1 inch = 25.4 mm
29