Power Supply By Poe - 3Com WL-607 Quick Installation Manual

Figure8 Mount the AP to the T-rail
(1) M3×6 screw
(3) Mounting hook
(5) Mounting clip
(7) Screw hole
(9) Key-hole clip

Power Supply by PoE

Power is supplied to the AP9152 through a PoE module or PoE switch. Connect one
end of an Ethernet cable to the Ethernet interface of the AP9152 and the other end to
an Ethernet interface of the PoE device.
Caution: Identify the mark on the device to avoid confusing the console interface for
the Ethernet interface, or vice versa.
(2) T-rail
(4) T-rail holder
(6) Wall-mounting bracket
(8) M4×8 screw
(10) M4×8 screw
xi