Charging The Battery - Canon powershot SD870IS digital elph User Manual

EC231CUG-E.book Page 207 Thursday, June 7, 2007 10:22 AM
You may be able to check the charge state depending upon how the
terminal cover is attached (Fig. C, D).
Fig. C
Charged Battery
Attach it so the
is visible
You are recommended to use it in the camera until it is
depleted and to store it in an indoor location with low relative
humidity and between the temperatures of 0 – 30 °C (32 – 86
°F).
Storing a fully charged battery for long periods of time (about one
year) may shorten its life cycle or affect its performance. If you do
not use the battery for long periods of time, charge it fully and
discharge it in the camera about once a year before returning it to
storage.

Charging the Battery

Since this is a lithium-ion battery, you need not discharge it
before recharging.
It takes approximately 2 hours 5 minutes to fully charge the
battery from a depleted state (based on Canon's testing
standards).
• •Charging it within a temperature range of 5 – 40 °C (41 – 104 °F)
is recommended.
• Charge times may vary according to the ambient temperature and
the battery's charge state.
You are advised to charge the battery on the day of use, or one
day before, to ensure a full charge.
• Even charged batteries continue to discharge naturally.
If the performance of the battery diminishes substantially even
when it is fully charged, its life has been exceeded and it
should be replaced.
Appendix
Fig. D
Spent Battery
Attach it the opposite
way to Fig. C.
207