Egr Valve - Subaru LEGACY 2003 Service Manual

EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)

6. EGR Valve

A: REMOVAL
1) Disconnect battery ground cable.
2) Remove air intake chamber. <Ref. to IN(H6DO)-
6, REMOVAL, Air Intake Chamber.>
3) Remove starter. <Ref. to SC(H6DO)-6, REMOV-
AL, Starter.>
4) Remove EGR pipe from EGR valve and cylinder
head.
5) Remove EGR valve from intake manifold.
EGR VALVE
6) Disconnect connector from EGR valve.
B: INSTALLATION
FU-00009
NOTE:
Replace old gaskets with new one.
1) Connect connector EGR valve.
2) Install EGR valve to intake manifold.
Tightening torque:
EC-00112
EC-00113
EC(H6DO)-10
19 N·m (1.9 kgf-m, 14 ft-lb)
EC-00114
EC-00114
EC-00113