Motorola RDU2020 User Manual page 62

RDX Series Programming Quick Reference
Function Appearance
Press & hold side button 1 for 3 sec. and turn on radio to enter
programming mode.
Frequency
*depending upon model
*
Interference
Eliminator
Code
Bandwidth
RDX Series Programming Quick Reference
Radio On Visual
Call Tone
Press \ until
change, press [or ].
depending upon model
Appears after
l
for each channel.
Press \ until K displays. Press
[ or ] to select D (25.0 kHz)
or C (12.5 kHz).
Note: If bandwidth is not flashing,
it is not selectable on the
chosen frequency.
\as needed, then [or ]
Choose1, 2, 3, or
0 = Off (default).
displays. To
l
shows. Set