Table of Contents
Advertisement
PRELIMINARY
Click OK to complete the login process
22. Select the Configuration hotlink from the navigation bar.
23. Enter the SSID (name or address) for the AP in the SSID field. The SSID must be 1
through 32 characters in length.
You can have more than one AP in a single SSID. If you are
configuring more than one AP in a single SSID, you must
specify a unique System Name for each AP within a single
SSID.
24. Specify the radio channel of operation of the AP by selecting the desired value from the
Radio Channel drop-down menu. This value specifies the frequency the stations (STAs)
under the AP are associating with in Infrastructure mode.
Note that the radio channel is specified using the IEEE 802.11a
standard. For example, channel 48 is the equivalent of 5.240
GHz. The formula below shows how the channel number is
derived:
25. Click Update to commit the changes.
Actiontec Electronics, Inc.
Channel Number = Channel Frequency (in MHz) – 5000
Chapter
MHz
5 MHz
COMPANY CONFIDENTIAL
2
Advertisement
Table of Contents
