How To Install Sanitary Water Tank Kit - LG THERMA V AHBW036H0 Installation Manual

How to install sanitary water tank kit

Follow below procedures Step 1 ~ Step 5.
Step 1. Uncover the water tank kit and locate it on the wall.
Step 2. Connect the water tank kit to the main power like the below figure 2.
Step 3. Connect the water tank kit to the Main PCB like the below figure 2.
Step 4. Connect power cord of sanitary tank heater. It is located inside of the tank. Refer to the next
page for more information.
Step 5. Find sanitary water tank sensor. Plug it to 'CN_TH4' (Red Connector) of the Main PCB. The
sensor should be mounted correctly to the sensor hole of sanitary water tank. Like below
figure. 1
Step 6. Connect the Main PCB to terminal block with wire(Part 4) like figure 3.
Sanitary Water Tank Sensor
CN-TH4
CH-B/HEAT(A)
CAUTION
Sensor mounting
Insert sensor into sensor socket and bolt it tightly.
Sanitary Water
Tank
Fig. 1
Accessories Installation
Main Power
220-240
Fig. 2
Fig. 3
1 2 3 4 5 6
6 7
BR BL
Main PCB
Installation Manual 37