Download Print this page

Fujitsu PSN 900 Plus Operating Manual page 12

Palm vein identification device (pvid)

Advertisement

should be set before setting an ID.
PIN code setting rules:
alphanumeric characters.
3. If the selected work mode is the Group No. + Palm Vein mode, you should
use the PalmPass network management system at the same time to set the
grouping information.
Group setting rules:
1-digit number.Users are assigned to different groups.
Click the "Next" button to enter the "Please select the door access control
number type" interface. Set the output door access control number by selecting the
"ID digital part" or "User-defined":
Door access control number setting rules:
numbers, which can be automatically the numeral part of a user ID or be
customized as required but cannot begin with 0.
Step 6: After the user ID is entered, click the Next button to register a normal
user, administrator, time zone user or temporary user by following screen prompts.
Step 7: Authentication
After different work modes have been registered, different screens for waiting
for Identification or Verification will appear as shown in the figure below. When the
administrator needs to do management, just click on the idle screen, and when the
Management button appears, the administrator can put a hand for authentication.
1. When you are registered in the Palm Vein mode, the idle screen is as
follows:
Up to 6 characters consisting of numbers, letters or
represented by A/B/C/D + one 1-digit number or one
11
Up to 10 characters all consisting of

Advertisement

loading