Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Marksman 67063c
Summary of Contents for Marksman 67063c
- Page 1 INSTRUCTION MANUAL Read all the instruction carefully before you use the appliance and keep it for future use. 600w Angle grinder 230V~50Hz 67063c 600w 11000rPM 115MM disc 3 AMP fuse (max) must be fitted to plug attached to this cable.
-
Page 2: Important Safeguards
4. Gear Box 5. Housing Handle 6. Protective Cover 7. Lock Button 8. External Flange Spanner 9. External Flange with Thread 10. Internal Flange Technical Data 67063c - 67071c Voltage/Frequency: 230V- 50Hz Input power: 600w No-load speed: 11000/min Disc size: Ø115mm... - Page 3 • Keep children away! • Do not let other people touch the tool or the cable! • Keep other people out of the working area! Make sure that the tool is stored . safely! • Unused electric tools are to be kept in a dry, secure place, out of the reach of children! •...
-
Page 4: Special Safety Instructions
• Damaged switches are to be replaced in a customer service shop! Do not use electric tools that cannot be switched on or off! WARNING! • For your own safety always use only the accessories and attachments specified in the operating instructions or recommended or specified by the tool manufacturer! •... -
Page 5: Maintenance
Cutting Stone Material When cutting stone material you should use a flat cutting off wheel. You can use wheels with diameter of 125 mm. Always approach the job at the same angle at which you would like to cut. Maintain this angle during cutting and do not exert any side pressure on the wheel. Inserting the Wheels/Disks Please proceed as follows when inserting the wheel/disk: 1. -
Page 6: Safety Instructions
Cleaning and Care • Before cleaning the machine I remove the mains plug from the socket and turn the on and off switch (1) to position (0) ! • For cleaning purposes, only use a slightly damp but not wet cloth! •... - Page 7 and adjusting wrenches are removed from tool before turning it on. 16. Avoid unintentional starting - Don’t Carry plugged-in tool with finger on switch. Be sure switch is off when plugging in. 17. Outdoor use extension cords - When tool is used outdoors, use only extension cords intended for use outdoors and so marked.
- Page 8 To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling. 600w Angle grinder 67063c 67071c...