Table of Contents
Advertisement
IMPORTANT SAFEGUARDS
Please read these operating instructions before using the tool for the first time and keep them with
the tool at all times.
Overview
1. On And Off Switch
2. Drive Shaft
3. Side Handle
4. Gear Box
5. Housing Handle
6. Protective Cover
7. Lock Button
8. External Flange Spanner
9. External Flange with Thread
10. Internal Flange
Technical Data
Voltage/Frequency:
Input power:
No-load speed:
Disc size:
General Safety Instructions for Electric Tools
This device is to be exclusively for private use! It is not fit for commercial use!
Warning: when working with electrical devices the following prevention and safety
instructions are to be observed to avoid fires, electric shocks an physical injuries!
For safe working:
• Keep the working area in order'
• Disorder in the working area can give rise to dangers of accidents! Pay attention to the ambient
conditions!
• Do not leave electric tools under the rain!
• Do not use these in humid or wet surroundings! .
• Make sure that there is enough light! Make sure that the working area is visible at a glance!
• Do not use electric tools in areas subject to the risk of fires! Protect yourself against electric
shocks!
• Avoid coming into contact with earth parts (e.g. pipes, radiators. stoves, refrigerators) !
• In case of extreme application conditions (e.g. high humidity, presence of metal particles, etc.) the
electrical safety of the device can be improved by connecting an isolation transformer or a fault
current circuit breaker!
67063c - 67071c
230V- 50Hz
600w
-1
11000/min
Ø115mm
Advertisement
Table of Contents
