Toyota Sienna 2010 Owner's Manual page 465

4-3. Do-it-yourself maintenance
STEP 5
Cleaning method
■
Replacement method
■
470
Remove the filter from the fil-
ter case.
If the filter is dirty, clean by
blowing compressed
through the filter from the
downward side.
Hold the air gun 2 in. (5 cm)
from the filter and blow for
approximately 2 minutes at 72
psi (500 kPa, 5.0 kgf/cm
bar).
If it is not available, have the
filter cleaned by your Toyota
dealer.
Install a new filter to the filter
case.
The "↑UP" marks shown on the
filter should be pointing up.
air
2
or