IBM FlashSystem 900 Product Manual page 7

Table 1. Specifications (part 2 of 2)
Specification
Cooling
Power supply
Input power
Heat dissipation
Hot-swap parts
Security features
Platforms supported
Warranty
Service and support
Physical Specifications
Dimensions
Weight
FlashSystem 900 Product Guide
Description
Four hot-swappable fan modules.
1300 watts, high-power version to run at maximum performance for
longer durations during power supply servicing. Two redundant
hot-swap 200 - 240V AC auto-sensing power supplies.
1300 watts maximum, 625 watts RAID5 typical operation, per 2U
Approximately 2133 BTU (assuming 625W). For maximum
configurations, it could go as high as 3753 BTU (maximum
configuration using RAID 5).
All active components.
AES-XTS 256 bit data-at-rest encryption with local key management.
Two new functions have been added to the encryption feature and can
be accessed by using the FlashSystem 900 GUI:
o Hot Encryption Activation - Adding an encryption license to a
previously initialized system
o Encryption Re-key - Changing the encryption key on a previously
initialized system
For specific information, see the IBM System Storage Interoperation
Center (SSIC) at
http://www.ibm.com/systems/support/storage/ssic/interoperability.wss
Set of Machine Types in AAS, 24 X 7 Service level Agreement, 4 hour
response time:
o 9840-AE2 - One year.
o 9843-AE2 - Three years.
Optional warranty service upgrades and post-warranty services are
available on site with 24x7 2-6 hour response, 24x7, or 9x5 same day,
or 9x5 next business day response,
Width: 445 mm (17.5 in.) (19-inch Rack Standard)
Depth: 761 mm (29.96 in.)
Height: 86.2 mm (3.39 in.)
34 Kg ( 75 lb ) for fully configured machine ( 12 IBM MicroLatency
modules )
7