PHI 2000 PURO/VAPORE
1
7.2. KYB interface
Remove
the
RHS
and LHS light guide.
7.3. The control knob and coffee keys
To remove the coffee keys from the control
keypad, detach them from the anchoring device
on the back of it and take them out.
2
Loosen the screws shown,
detach the dispenser, then
remove
the
circlip
gear as illustrated in the
photograph.
For PHI 2000 Puro: loosen
the screws shown and
remove the flat cable
Disassembling the hatch
3
1) Detach the hatch by pressing the fastenings.
2) Lift the fastenings shown.
3) Slot for pins.
Slide out the control
keypad.
and
To remove the knob,
simply slide it out of
its position.
07 DISASSEMBLY
Remove the flat cable
shown and slide out
the P.C.B.
2/8