2.2 Switch Front Panel Layout
Figure 2-1 shows the front panel of the Industrial Managed Switch.
Ethernet Port
Input Connector
2.3 LED Indicators
System
LED
Color
PWR 1 Green Lights to indicate DC power input 1 has power.
PWR 2 Green Lights to indicate DC power input 2 has power.
Fault
Red
Lights to indicate that the Industrial Switch has failed
Lights to indicate that the ERPS Ring has been created
Ring
Green
successfully.
Lights
R.O.
Green
Blinks To indicate the Ring state is in protect mode.
Off
Per 10/100/1000BASE-T Port (Port 1~2)
LED
Color
Lights
LNK/ACT Green
Blinks
1
M12 Gigabit
3
M12 Gigabit
Ethernet
PoE+ Port
5
V2
V1
V2
V1
M12 Power
INPUT
PoE
DC 48-56V
Figure 2-2: IGS-604HPT-M12 Front Panel
To indicate the Ring Owner has been enabled and the
state is in idle mode.
To indicate that the Ring Owner hasn't been enabled.
To indicate the port is running in 10/10/1000Mbps
speed and successfully established.
To indicate the switch is actively sending or receiving
data over that port.
LNK/ACT
2
LNK/ACT
4
PoE
LNK/ACT
6
PoE
Pin
Con
2
1
3
7
1
DA+
2
DA
4
6
3
DB+
FAULT
4
DC+
5
8
5
DC
6
DB
PWR 2
R.O.
Power, Fault,
7
DD+
8
DD
Ring LEDs
PWR 1
Ring
IP67
Mgt.
IGS-604HPT-M12
Function
Function
5