Configure A Proxy Server; Configure Port Forwarding; Reset Your Personal Cloud - Seagate Personal Cloud SRN21C User Manual

Note: Not all routers support IPv6. Go to test-ipv6.com to determine if IPv6 is
.IPv4). Select Manual or Automatic (DHCP) from the pull-down menu, and then click Save) .5
A proxy server acts as an intermediary between computers and the Internet. It allows the computers on your
:network to make indirect network connections to other network services. Using a proxy server
.Enter the proxy server address and the name and password if authentication is required .4
Port forwarding makes your Personal Cloud on your network accessible to other network attached storage
devices on the Internet, even though your Personal Cloud is behind a router. Automatic port forwarding is
.enabled by default, and the port numbers are the same for your Personal Cloud and router ports
If you need to change the router port number for services, confirm that the ports are available on your router.
Additionally, you must confirm that your router is compatible with UPnP-IGD/NAT-PMP protocols. See your
.On the Port Forwarding tab, move the cursor over the service until the Edit button appears on the right .3
You can reset your device. A reset is not data-destructive. Performing these steps resets the network settings
40
.IPv6). Select an option from the pull-down menu, and then click Save) .6
Hides the IP address of a computer so that you can surf anonymously
Bypasses security restrictions and filters to access blocked websites easily
.Note: Your router must have a proxy server to complete these steps
.On the Proxy tab, select Proxy server in the drop-down menu .3
5/18/17
.Click Show advanced settings, and then click Network .2
.On the Connections tab, click Edit .3
.Click either the IPv4 or IPv6 tab .4
.supported by your router
Configure a proxy server
.Click Show advanced settings, and then click Network .2
Configure port forwarding
.Click Show advanced settings, and then click Network .2

Reset your Personal Cloud

.Open the Device Manager


.Open the Device Manager
.Click Apply .5
.router's user manual for details
.Open the Device Manager
.Click Edit, and then click Enable .4
.1
.1
.1
Seagate Perso nal Clo ud