Oil And Oil Filter Change; Engine Oil And Oil Filter Change; Topping Up The Compressor Oil - Atlas Copco XAMS 1150 CD7 T3 APP Instruction Manual

OIL AND OIL FILTER CHANGE

ENGINE OIL AND OIL FILTER CHANGE

See section Preventive maintenance schedule.

TOPPING UP THE COMPRESSOR OIL

(1)
(2)
1. Stop the compressor. Wait a few minutes until the
pressure is released through the automatic blow-
down valve. Make sure that all pressure is
released by loosening the filler plug (1) one turn.
2. Wait a few minutes until the oil level is constant.
3. Remove the filler plug (1) and top up with oil until
the pointer of the oil level gauge (2) is in the upper
part of the green area.
4. Reinstall and tighten the filler plug (1).
- 66 -