Starting / Stopping Via Remote Control - Atlas Copco XAMS 1150 CD7 T3 APP Instruction Manual

STARTING / STOPPING VIA REMOTE CONTROL

1 2
5 4 3
Always use the remote control function
in accordance to
legislation.
1. On / off
2. Control light
3. Start engine
4. Stop engine
5. Load/unload compressor
The maximum range in the open field is
350 metres with full batteries. Obstacles
between receiver and control unit should
be avoided.
When using several remote controlled
units, please take care that there is a
distance between two receivers of at least
80 cm.
To use remote control, the controller must be set for
remote operation and the power switch on the control
panel must be off.
local/work area
- 51 -