Page 2 –12
SPS-1
The SPS-1 allows spreading of solder to the LGA components pads over
the rework stencils.
SRT-6
SRT-6 is used to open phone covers.
SS-54
Alignment jig is used to efficiently assemble the dome-sheet to the
pone's PWB. The jig is made of EDS proof material.
ST-30
It is used together with RJ-51 to rework the Front End Module (FEM)
N7700.
COMPANY CONFIDENTIAL
Copyright © 2007 Nokia. All rights reserved.
Soldering Paste
Spreader
Opening tool
Alignment Jig
Rework stencil
RM-305; RM-306
Service Tools
Issue 2