Sony CMT-SE7 Operating Instructions Manual page 61

6
Press V or v repeatedly until the track
number you want to change the
recording level appears, then press
ENTER/YES.
"Time5.0s" appears.
7
While monitoring the sound, press V or
v repeatedly to change the Fade-in or
Fade-out recording time.
The system plays the portion that will be
recorded over using Fade-in or Fade-out
Recording. You can set the time at any
value between 1.0 second and 15.0 seconds,
in 0.1 second steps. You cannot set the time
longer than the track.
8
Press ENTER/YES.
"S.F Edit OK?" appears.
9
Press ENTER/YES again.
The system starts recording over the
existing track.
"S.F Edit: ** %" appears while the track is
being recorded. When the recording
finishes, "Complete!" appears.
To cancel the operation
Press MENU/NO during step 4 through 8. After
pressing ENTER/YES in step 9 to start
recording, you cannot interrupt the operation.
Notes
• Do not disconnect the mains lead or move the system
while recording is in progress. This may damage the
recording data preventing recording from being
performed properly.
• You cannot change the recording level of the tracks
recorded in MDLP mode.
• Repeatedly changing the recording level results in
poor sound quality.
• The recording level will not return to the exact
original level once the recording level has been
changed even if it returned to the original level.
• The recording level cannot be changed while the
timer is activated.
• You cannot undo the S.F Edit Function even if you
use the Undo Function.
61 GB