Changing The Recorded Level After; Recording; Edit Function - Sony CMT-SE7 Operating Instructions Manual

Changing the recorded
level after recording
— S.F Edit Function
You can change the volume of recorded tracks
using S.F (Scale Factor) Edit. The original track
is recorded over at the new recording level.
When changing the recording level, you can
select Fade-in Recording to gradually increase
the signal level at the start of recording, or Fade-
out Recording to gradually decrease the signal
level at the end of the recording.
Changing the overall
recording level
Open the lid before performing the following
operations.
1
Press FUNCTION repeatedly to switch
the function to MD.
2
Press PLAY MODE in stop mode
repeatedly until both "SHUF" and
"PGM" disappear.
3
Press MENU/NO.
4
Press V or v repeatedly until "S.F
Edit?" appears, then press ENTER/
YES.
5
Press V or v repeatedly until "Tr
Level?" appears, then press ENTER/
YES.
Playback starts.
6
Press V or v repeatedly until the track
number you want to change the
recording level appears, then press
ENTER/YES.
"Level 0 dB" appears.
GB
60
7
While monitoring the sound, press .
or > repeatedly to change the
recorded level.
The recording level can be changed from
–12 dB to +12 dB, in 2 dB steps. Change to
the optimum level while making sure that
"OVER" does not appear in the display at
the loudest portion.
Adjust the level so as not to light up "OVER".
8
Press ENTER/YES.
"S.F Edit OK?" appears.
9
Press ENTER/YES again.
The system starts recording over the
existing track.
"S.F Edit: ** %" appears while the track is
being recorded. An amount of time that is
roughly equal to or longer than the playback
time of the track is required when recording
over the track. When the recording finishes,
"Complete!" appears.
Fade-in and Fade-out

Recording

Open the lid before performing the following
operations.
1
Press FUNCTION repeatedly to switch
the function to MD.
2
Press PLAY MODE in stop mode
repeatedly until both "SHUF" and
"PGM" disappear.
3
Press MENU/NO.
4
Press V or v repeatedly until "S.F
Edit?" appears, then press ENTER/
YES.
5
Press V or v repeatedly until "Fade
In?" or "Fade Out?" appears, then
press ENTER/YES.
Playback starts.