Remove And Install The Battery - Zte Q200 User Manual

C h a p t e r

Remove and Install the Battery

The attached Li-ion battery along with the phone can be used after unpacking. For the first three times,
please use up the power and charge it fully for a new battery to perform well.
Remove the Battery
Put finger on the finger grips, and then lift up the battery to remove the battery.
Install the Battery
1. Install the battery as shown below. Replace the battery into the battery slot, to be noted that the side of
the battery firstly inserted.
2. Put the back cover of the phone flatly upon the body of phone. Direct the back cover towards the
locking catches on the each side of the phone and press the back cover of the phone to lock the cover
into its place.
Confidential and Proprietary Information of ZTE CORPORATION 5
ZTE-C Q200 User Guide
4