Dodge Challenger 2017 User Manual page 55

Hide thumbs Also See for Challenger 2017:
Table of Contents

Advertisement

HEATED/VENTILATED SEATS
Front Heated Seats
If your vehicle is equipped with front heated seats, the control buttons are located within
the Uconnect system. You can gain access to the control buttons through the climate
screen or the controls screen.
• Press the heated seat button
• Press the heated seat button
• Press the heated seat button
If the HI-level setting is selected, the system will automatically switch to LO-level after
approximately 60 minutes of continuous operation. At that time, the display will change
from HI to LO, indicating the change. The LO-level setting will turn off automatically after
approximately 45 minutes.
NOTE:
The engine must be running for the heated seats to operate.
Vehicles Equipped With Remote Start
On models that are equipped with remote start, the heated seats can be programmed to
come on during a remote start.
This feature can be programmed through the Uconnect system. Refer to "Uconnect
Settings" in "Understanding Your Instrument Panel" in the Owner's Manual on
www.dodge.com/en/owners/manuals for further information.
• Persons who are unable to feel pain to the skin because of advanced age, chronic
illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion or other
physical condition must exercise care when using the seat heater. It may cause burns
even at low temperatures, especially if used for long periods of time.
• Do not place anything on the seat or seatback that insulates against heat, such as a
blanket or cushion. This may cause the seat heater to overheat. Sitting in a seat that
has been overheated could cause serious burns due to the increased surface
temperature of the seat.
G E T T I N G S T A R T E D
once to turn the HI setting on.
a second time to turn the LO setting on.
a third time to turn the heating elements off.
WARNING!
53

Advertisement

Table of Contents
loading

Table of Contents