Table of Contents
Advertisement
10 Setup
To use the S-Video connector
To use the composite video connector
To connect the audio connectors
To use the RF connector
If your television does not have any video and audio input,
you will need to use the radio frequency output from the dig-
ital receiver.
You will need to obtain a S-Video cable to
use the S-Video connector. Plug one end
of the cable into the S-VIDEO socket on the
digital receiver, and the other end into the
matching socket on your television.
You will need to obtain a composite video
cable (RCA cable) to use the composite video
connector. Plug one end of the cable into
the VIDEO (yellow) socket on the digital re-
ceiver, and the other end into the matching
socket on your television.
You will need to obtain an audio cable (RCA
cable) to connect the audio connectors. Plug
one end of the cable into the AUDIO L
(white) and AUDIO R (red) sockets on the
digital receiver, and the other end into the
matching sockets on your television or au-
dio system.
Advertisement
Table of Contents
