Topfield TF MMDS100 User Manual page 13

Digital cable receiver
Table of Contents

Advertisement

• The wall outlet should be near the equipment. Do not
run an extension lead to the unit.
• Do not expose the digital receiver to any moisture. The
digital receiver is designed for use indoors only. Use dry
cloth when cleaning the digital receiver.
• Place the digital receiver on a firm and level surface.
• Do not place the digital receiver close to heat emitting
units or in direct sunlight, as this will impair cooling.
Do not lay any objects such as magazines on the digi-
tal receiver. When placed in a cabinet, make sure there
is a minimum space of 10 centimetres around it. For
the physical specification of the digital receiver, refer to
Table 2.2.
• Protect the power cord from being walked on or
pinched. If the wires are exposed or the cord is dam-
aged, do not use the digital receiver and get the cord
replaced.
• Never open the digital receiver casing under any cir-
cumstances. The warranty will be void.
• Refer all servicing to a qualified service technician.
Table 2.1: Power specification
Input voltage
Power consumption
Table 2.2: Physical specification
Size
Weight
Operating temperature
Storage relative humidity
2.2 Safety precautions 7
90 to 250 V AC, 50/60 Hz
9 W at maximum in operation
8 W in standby
260
46
190 mm
1.2 kg
0 to 45 °C
5 to 95 %

Advertisement

Table of Contents
loading

Table of Contents