Advertisement
Command Control via the Network
Command Control via the Network
When the projector connects network, the projector can be controlled with RS-
232C commands from the computer with web browser.
For details of RS-232C commands, refer to RS-232C Communication / Network
command table (&18).
NOTE • If data is transferred via wireless and wired LAN at the same time, the
projector may not be able to process the data correctly.
Connection
Turn off the projector and the computer.
1.
If you use wired LAN, connect the projector's LAN or HDBaseT
2.
the computer's LAN or HDBaseT port with a LAN cable. Use the cable that
fulfi lls the specifi cation shown in fi gure. If you use wireless LAN, insert the USB
wireless adapter into the WIRELESS port of the projector.
Turn the computer on, and after the computer has started up turn the
3.
projector on.
12
WIRELESS port
LAN
HDBaseT port
• LAN cable (CAT-5e or greater)
• For HDBaseT connection
- CAT-5e or greater
- shielded type (connectors included)
- straight cable
- single cable
LAN or
or
TM
port to
USB wireless adapter
Advertisement
