Clearing Local Logs; Configuring The Local System Log - RuggedCom RSG2488 User Manual

Chapter 3
Device Management
Section 3.6.2

Clearing Local Logs

To clear both the local crash and system logs, log in to the CLI shell and type:
clearlogs
To clear only the local system log, log in to the Web interface and do the following:
1. Navigate to Diagnostics > Clear System Log. The Clear System Log form appears.
1
Figure 13: Clear System Log Form
1. Confirm Button
2. Press Confirm.
Section 3.6.3

Configuring the Local System Log

To configure the severity level for the local system log, do the following:
NOTE
For maximum reliability, use remote logging. For more information, refer to
Remote Logging".
1. Navigate to Administration > Configure Syslog > Configure Local Syslog. The Local Syslog form appears.
2
Figure 14: Local Syslog Form
1. Local Syslog Level
2. Configure the following parameter(s) as required:
Parameter
Local Syslog Level
54
2. Apply Button 3. Reload Button
Description
Synopsis: { EMERGENCY, ALERT, CRITICAL, ERROR, WARNING, NOTICE,
INFORMATIONAL, DEBUGGING }
Default: INFORMATIONAL
RUGGEDCOM RSG2488
User Guide
Section 3.6.4, "Managing
1
3
Clearing Local Logs