Table of Contents
Advertisement
TO ATTACH NOSE ROLLER
1. Assemble brackets "A" and "B" to the
inside of mower mounting brack ets as
shown. Tighten securely.
NOTE: Be sure bracket tabs are po si -
tioned in tab holes in mower brackets.
2. Position nose roller between brackets
and install rod and retainer spring.
Lock
Nut
Tab
Hole
"A" Bracket
Retainer Spring
ASSEMBLE GAUGE WHEELS TO
MOWER DECK
The gauge wheels are designed to keep
the mower deck in proper position when
operating mower. Be sure they are prop-
erly adjusted to ensure optimum mower
performance.
1. Slide gauge wheel bar down into
Hex Bolt
Rod
"B"
Bracket
2. For ease of mower to tractor as sem bly,
Nose Roller
NOTE: Adjust gauge wheels before op er -
at ing mower. See "TO ADJUST GAUGE
WHEELS" in the Operation sec tion of this
manual.
Shoulder
Bolt
Gauge
Wheel
10
bracket channel, Be sure that gauge
wheel bar aligning holes are on top.
As sem ble gauge wheels as shown
using shoulder bolts, 3/8 washers and
3/8-16 center locknuts and tighten
securely.
raise gauge wheels to highest position
and retain with clevis pins and spring
retainers.
Retainer
Spring
Pin
Ad just ing
Bar
3/8 Washer
3/8-16 Center
Locknut
Advertisement
Table of Contents
