Link Information - SMC Networks EZ Connect SMC2602W User Manual

U C
TILITY ONFIGURATION
Channel – If you are setting up an ad-hoc wireless LAN (See "Network
Topologies" on page 20.), set the channel number to the same radio
channel as that used by the other wireless clients in your group. However,
if you are connecting to a network via an access point, then the channel is
automatically set to the channel of the access point to which the adapter
connects.
Note:
SSID – Input an SSID string for the wireless network to which you want
to connect. (This setting is blank by default.) If you will be roaming among
multiple access points with different BSSIDs, leave the SSID blank to
connect to any access point.

Link Information

The Link Information window for the SMC2602W is shown as below.
16
The Channel can only be set when the Operating Mode is
"802.11 Ad-Hoc."