Before You Begin - IBM SP3001 Getting Started Manual

Before you begin

The steps you perform in the remainder of this document will provide you with remote network access
to the appliance so that you can perform more advanced configuration tasks.
You can find more advanced configuration information in the "Configuring" section of the SiteProtector
online Help.
Gather materials
You must prepare some information and gather your equipment before you can install your SiteProtector
System appliance.
Materials
U
IBM Security SiteProtector System SP3001 appliance
h
Ethernet cable (included with appliance)
h
2 power cords (included with appliance)
h
Gather network information
Use this table to record important network information you need to configure the appliance:
Settings
IP Address (required)
Subnet Mask
Default Gateway
DNS Server
Host Name
Gather operating system product key
Use this space to record the Product Key of the appliance's operating system.
This Product Key can be found on the Certificate of Authenticity that is affixed to the appliance. You will
need it in the event of a system restore.
Product Key _________________________________________
Gather SQL Server product key and tracking IDs
Use this space to record the appliance's SQL Server license Product Key and Tracking IDs.
The Product Key and Tracking IDs can be found on the Certificate of Authenticity that is affixed to the
appliance or in the accessory box. You will need them in the event of an RMA return.
Important: Save all the Product Key and Tracking ID information in a safe place.
SQL Server Product Key _______________________________
Tracking ID _________________________________________
Tracking ID _________________________________________
2
SiteProtector SP3001: Getting Started Guide
Your Settings
__________ . __________ . __________ . __________
__________ . __________ . __________ . __________
__________ . __________ . __________ . __________
__________ . __________ . __________ . __________
______________________________________________