1746-8/Upgrade; Ieee 519/Report; Maintenance; How To Clean - Fluke 1742 User Manual

1746-8/Upgrade

The upgrade license activates the advanced analysis features of the
1748 on a 1746 Logger. Features are:
•
Events: Waveform deviation
•
Event recordings: RMS profile
•
Event recordings: Waveform
•
Event recordings: Mains signaling RMS profile
The upgrade includes a Magnet Hanger Kit.

IEEE 519/Report

The IEEE 519/Report license enables a validation of voltage and
current harmonics according to the standard IEEE519: "IEEE
recommended practice and requirements for harmonic control in
electric power systems."
Enabled features are:
•
150/180 cycles harmonics data storage
•
Assessment of short and very short voltage and harmonics:
-
Pass/fail analysis at a glance with Energy Analyze Plus
software
-
Report generation
•
Calculation and validation of total demand distortion (TDD)

Maintenance

If the Logger does not require special maintenance if used
appropriately. Maintenance should only be done at a company related
service center by trained and qualified personnel within the guarantee
period. See www.fluke.com for locations and contact information of
Fluke Service Centers worldwide.
XW Warning
To prevent possible electrical shock, fire, or personal
injury:
•
Do not operate the Product with covers removed or the
case open. Hazardous voltage exposure is possible.
•
Remove the input signals before you clean the
Product.
•
Use only specified replacement parts.
•
Have an approved technician repair the Product.
W Caution
Do not damage the vent behind the battery door or the
IP65 ingress protection may be compromised.

How to Clean

W Caution
To avoid damage, do not use abrasives or solvents on
this instrument.
If dirty, carefully clean the Logger with a damp cloth (do not use
cleaning agents). Mild soap may be used.
Power Quality Logger
Maintenance
41