Changing The System Settings; System Settings Menu Layout - Panasonic KX-HDV130 Operating Instructions Manual

4.10 Changing the System Settings

Note
•
The feature depends on your phone system. Contact your administrator for further information.
To select the main item
1.
In standby mode, press
2.
Press [▲] or [▼] to select "System Settings", and then press
3.
Press [▲] or [▼] to select the main item, and then press
Main item
Status
Network Settings
System Settings

4.10.1 System Settings Menu Layout

Status
Sub Item
Line Status
For KX-HDV130:
Line 1–Line 2
For KX-HDV230:
Line 1–Line 6
Firmware Version
IP Mode
IPv4 Settings
IPv6 Settings
MAC Address
LLDP
CDP
Document Version: 2017-08
.
Menu
Line Status, Firmware Version, IP Mode, IPv4 Settings, IPv6 Settings, MAC
Address, LLDP, CDP, VLAN
IP Mode Select, IPv4 Settings, IPv6 Settings, LLDP, CDP, VLAN, Link Speed,
Embedded Web, Network Test
Set Time & Date, Authentication, Access Code, Xsi Setting, UC Setting,
Restart, DSS Restart (KX-HDV230 only)
Description
Displays the line status.
Displays the firmware version of the
telephone.
Displays the IP network mode.
Displays information about IPv4
settings.
Displays information about IPv6
settings.
Displays the MAC address of the
telephone.
Displays the LLDP status.
Displays the CDP status.
4.10 Changing the System Settings
.
OK
.
OK
Sub Item
Registered / Registering
*1
—
IPv4 / IPv6 / IPv4&IPv6
IP Address
*2
Subnet Mask
Default Gateway
DNS
*2
IP Address
*3
Prefix
*4
Default Gateway
DNS
*3
—
On / Off
On / Off
Operating Instructions
Status
/ (NULL)
*1
*2
*2
*3
89