1
3
①
②
③
④
7.2.1.4
Measurement views
Measurement views
Single value
1
①
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA
Long TAG
View number
Alarm icon
Alarm status text
Process value
The user-defined process value to be displayed is configured in menu
"View" (1-6) located at "Setup" → "Display"
Operating MASS 2100/FC300 with FCT030
2
4
Describes the measurement point and is shown in all operation views.
Can be changed via the menu "Long TAG" (3.1.1).
Shows the operation view number. The number refers to the view num‐
ber configured in the menu "Setup" → "Display".
Indicates an active alarm. Shows the alarm class, see Fault codes and
corrective actions (Page 188).
Only shown if an alarm is active.
Describes the alarm. Only shown if an alarm is active.
7.2 Operating instructions
119