Preventive Maintenance Schedule - Life Fitness PowerMill Assembly Instructions Manual

Preventive Maintenance Schedule

Item
Console Overlays
Cup Holder
Console Mounting Bolts
Frames
Plastic Covers
Lifepulse Sensors
Leg Levelers
Side Hand Rails
Steps
TURN OFF AND UNPLUG THE POWERMILL PRIOR TO PERFORMING THE MAINTENANCE ITEMS BELOW!
Step Chains
Drive Chain
Chain Sprockets
Motor Belt
Bearing Tracks
MCB Heat Sink
Electrical Connections
Front Step Shaft
Rear Step Shaft
Weekly Monthly
Clean
Clean Inspect
Clean
Clean Inspect
Clean / Inspect
Inspect / Adjust
Clean
Clean
Clean /
Lubricate
Clean /
Lubricate
Quarterly
Inspect
Inspect
Inspect
Page 23 of 24
Biannually Comments
Inspect
Inspect
Inspect
Inspect
Inspect
Clean and lightly
Clean /
lubricate with 30w oil on
Lubricate
Clean and lightly
Clean /
lubricate with 30w oil on
Lubricate
Wipe off excess old
Clean / grease and lightly apply
Lubricate lithium based grease to
sprocket teeth.
Inspect
Wipe off excess old
Inspect / grease and lightly apply
Lubricate lithium based grease to
Make sure heat sink is
Inspect / Clean
free of debris.
Inspect
Clean / lightly lubricate
with "Breakfree" solution
on cloth.
Clean / lightly lubricate
with "Breakfree" solution
on cloth.
a cloth.
a cloth.
tracks.