Selecting A Conventional Zone And Channel; Sending A Conventional Call; Receiving A Trunked Or Conventional Call - Motorola HT1250-LS+ User Manual

SELECTING A CONVENTIONAL
ZONE AND CHANNEL
1 Use the Zone Selector knob to select the
appropriate conventional zone.
2 + or ? until you see the desired
conventional channel on the display.

SENDING A CONVENTIONAL CALL

Note: In the United States, FCC regulations
require you to monitor the conventional
channels before sending a call. The
monitor feature (see page 22) can be
accessed through one of your
programmable buttons.
1 Hold the radio in a vertical
position at a distance of about
1 to 2 inches (2.5 to 5 cm)
from your mouth.
2 Press the PTT button and speak clearly into
the microphone. The LED indicator lights
steady red while the call is being sent.
3 Release the PTT button to listen.
RECEIVING A TRUNKED OR
CONVENTIONAL CALL
1 Turn your radio on.
2 Adjust your radio's volume (see page 35).
3 Use the Zone Selector knob to select the
desired trunked or conventional zone.
• Make sure the PTT button is released.
4 Listen for voice activity. The LED indicator
flashes red when your radio is receiving.
Note: In
YYYY
PassPort
mode,
the Mobile Identity Number (XXXX)
of the calling radio appears on the
display if enabled.
37
English