Connect Your Monitor To Your Computer - HP V273 User Manual

2.2 Connect your monitor to your computer

1.
Power off and unplug your computer.
2.
For analog operation, connect the 15-pin end of the signal cable to the VGA port of your monitor and
the VGA OUT jack on the back of your computer. For digital operation, connect the HDMI cable to
the HDMI port on the monitor and the HDMI port on the back of the computer. For Audio
function(option), connect the Audio cable to the Audio-in port on the monitor and the Audio-out port
on the back of the computer
3. Attach the base into the bottom of the stand arm until the center holes are
aligned and automatically locked.
4