HP V273 User Manual page 11

You can change the Function buttons from their default values so that when the buttons are
activated you can quickly access commonly used menu items.
To assign the Function buttons:
1. Press one of the four front bezel buttons to activate the buttons, and then press the Menu
button to open the OSD.
2. In the OSD menu, select Menu Control > Assign Buttons and then select one of the available
options for the button you want to assign.
NOTE: You can only assign the three Function buttons. You can not reassign the Menu
button or the Power button.
3.3 About Low Blue Light Mode
Decreasing the blue light emitted from the display reduces the blue light exposure to your eyes.
HP monitors provide a setting to reduce blue light output and create a more relaxing and less
stimulating image while you read content on the screen. To adjust your monitor to a comfortable
viewing light, follow the steps below.
To adjust the blue light output from the display:
1. Press the Viewing Modes button.
2. Select your desired setting:
Low Blue Light: Reduces blue light for improved eye comfort
Reading: Optimizes blue light and brightness for indoor viewing
Night: Adjusts to the lowest blue light and reduces the impact on sleep
3. Select Save and Return to save your setting and close the Viewing Mode menu. Select
Cancel if you don't want to save the setting.
4. Select Exit from the Main menu.
CAUTION: To reduce the risk of serious injury, read the Safety & Comfort Guide. It
describes proper workstation setup, and proper posture, health, and work habits for computer
users. The Safety & Comfort Guide also provides important electrical and mechanical safety
information. The Safety & Comfort Guide is located on the Web at http://www.hp.com/ergo .
10