Table of Contents
Advertisement
DSST~2801~A.qxd 1/25/2003 6:46 PM Page 8
BASE UNIT Controls
1.
Button: Press and hold down to record memo messages.
MEMO
2.
Button: Press to set/check the day and time.
TIME
3.
(OUTGOING MESSAGE) Button: Press and hold down to record OGM messages.
OGM
4.
Button: Press to erase messages.
ERASE
5. CHARGE TERMINALS: For charging the HANDSET BATTERY PACK. For best
performance, clean the CHARGE TERMINALS periodically with a damp cloth.
6. SPEAKERPHONE LED Indicator: Lights up when the BASE UNIT speakerphone function
is activated.
7. IN USE/CHARGE LED Indicator: (IN USE) Lights up to indicate that the HANDSET is in
TALK mode. (CHARGE) Lights up when the HANDSET is placed on the BASE UNIT for
charging.
8. ANSWER FUNCTION ON/OFF (ANS. ON/OFF) LED Indicator: Lights when the answer
function is turned ON.
9. MICROPHONE
10.
ANS
(ANSWER FUNCTION ON/OFF) Button: Press to activate or deactivate the answer
ON/OFF
function.
11.
Button: Press to PAGE the HANDSET. Press again to stop.
PAGE
12.
Button: Press and hold to set the 3-digit Remote Access Code for remote operation.
CODE
13. MESSAGE ALERT: Set switch to ON to generate a "beep" sound every 12 seconds when a
new message has been received.
14. ANNOUNCE ONLY/INCOMING MESSAGE Switch:
ICM - System records the incoming messages.
ANNC - System plays your announcement and then hangs up without recording messages.
15. RINGER ON/OFF Switch: Set switch to OFF position to disengage the ringer on the BASE
UNIT.
16. RING SELECT Switch: To select the number of rings before the Answering System answers
a call.
3R - System answers a call after the third ring.
5R - System answers a call after the fifth ring.
TS (TOLL SAVER) - System answers after the third ring only if you have new
messages. Otherwise, the system will answer after the fifth ring.
17.
(MAILBOX 1) Button: Press to activate functions for MAILBOX 1.
MAIL
1
BASE UNIT Controls
18.
(MAILBOX 2) Button: Press to activate functions for MAILBOX 2.
MAIL
1
19.
(MAILBOX 3) Button: Press to activate functions for MAILBOX 3.
MAIL
3
20.
(MAILBOX 4) Button: Press to activate functions for MAILBOX 4.
MAIL
4
21. BASE UNIT ANTENNA
22. MAILBOX LED Indicators: Lights to indicate the presence of message(s) and blinks to
indicate that the corresponding MAILBOX is active and ready to operate.
23.
Button: Press to stop playing a message.
STOP
24.
(VOLUME UP) Button: Press repeatedly to increase the speaker volume level of the
VOL+
BASE UNIT.
25.
VOL-
(VOLUME DOWN) Button: Press repeatedly to decrease the speaker volume level of
the BASE UNIT.
26.
Button: Press to play messages.
PLAY
27.
Button: Press to skip messages.
SKIP
28. LED MESSAGE DISPLAY: Indicates the number of memos/messages received, status of the
system.
EA - Erasing
01~63 - No. of memos/messages
Ao - Announce Only
FU - Memory is full
SP - Speakerphone function is being used
29.
Button: Press to repeat messages.
RPT
30.
(SPEAKERPHONE) Button: Press to answer a call using the BASE UNIT.
SPK
31. TONE-PULSE SELECT SWITCH
32. RESET Button: Press and hold down for 2 seconds to reset the system and clear all
recordings.
33. POWER-IN CONNECTION JACK
34. TELEPHONE LINE CONNECTION JACK
OP - OGM is playing
PA - Pause
Advertisement
Table of Contents
