LevelOne WAB-3003 Quick Installation Manual
  1. Manuals
  2. Brands
  3. LevelOne Manuals
  4. Wireless Access Point
  5. WAB-3003
  6. Quick installation manual
LevelOne WAB-3003 Quick Installation Manual

LevelOne WAB-3003 Quick Installation Manual

108m 11g outdoor poe ap
Hide thumbs Also See for WAB-3003:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
WAB-3003
108M 11g Outdoor PoE AP
Quick Installation Guide
V1.1

Advertisement

Table of Contents
loading

Related Manuals for LevelOne WAB-3003

Summary of Contents for LevelOne WAB-3003

  • Page 1 WAB-3003 108M 11g Outdoor PoE AP Quick Installation Guide V1.1...

  • Page 2: Package Contents

    Preface Package Contents 1. WAB-3003 x 1 The 802.11 b/g compliant WAB-3003 is a 2. Quick Installation Guide (QIG) x 1 Long Range Outdoor AP device that can be 3. User’s Manual with CD-ROM x 1 deployed as a traditional fixed wireless Access 4.

  • Page 3: System Overview

    For resetting the system of AP Reset Procedure 1. Make sure the WAB-3003 completes booting and is already running (The booting process of system usually takes 2 minutes) 2. *Unscrew the Screw then you will see a reset button (inside the hole) 3.

  • Page 4: Hardware Installation

    Step 3. Connect one end of an Ethernet cable to the PSE 2 connector on the lower panel and the other end to a computer. Step 4. Connect the power cord to the PSE. Step 5. Power on the PSE in order to supply power to the WAB-3003.

  • Page 5: Getting Started

    Getting Started WAB-3003 is a pure Access Point which supports web-based configuration. It is required to follow the respective installation procedures provided to properly set up the system.  Default IP Address of Web Management Interface: The default IP address and Subnet Mask for the WAB-3033 are as follows: IP Address 192.168.0.1...
  • Page 6 Step 1: IP Segment Setup for Administrator PC Set a static IP address on the same subnet mask as WAB-3003 in TCP/IP of the administrator PC, such as the following example. Do not duplicate the IP address used here with the IP address of WAB-3003 or any other devices within the same network.
  • Page 7 Step 4: Login Success After a successful login to WAB-3003, a System Overview page of WMI will appear. To logout, simply click on the Logout button at the upper right hand corner of the interface.

  • Page 8: Common Settings

    Common Settings Step 1: System Overview Click on the Status button and then select the System Overview tab. ...
  • Page 9 Step 2: Change Password Click on the Utilities button and then select the Password tab.  Enter a new password in the New Password field and retype it in the Re-enter New Password  field. Click SAVE to save the changes. ...
  • Page 10 Step 3: Network Settings Settings here are for example only Click on the System button and then select the Network tab.  Enable Static, and then enter the related information in the fields marked with red asterisks.  Click SAVE to save the settings. ...
  • Page 11 Step 4: ESSID Settings Click on the Wireless button and then select the General tab.  Band: Select an appropriate band from the drop-down list box. ...
  • Page 12 ESSID: Enter respective ESSID for each VAP in the ESSID field or use the default. ESSID  (Extended Service Set Identifier) is a unique identifier used for networking devices to get associated with WAB-3003. Note: For QoS classification, please enable VLAN ID and specify a VLAN ID with respective ESSID.
  • Page 13 The AP mode is now successfully configured. Caution: After WAB-3003's network configuration completes, please remember to change the IP Address of your PC Connection Properties back to its original settings in order to ensure that your PC functions properly in its real network environments.

Table of Contents