Contents Overview Charge stand Headset USB Bluetooth adapter Connect and pair Connect to PC Pair your headset Fit and charge Right or left Charge your headset Load software Customize your headset The Basics Make/Take/End Calls Mute/unmute Volume Play or pause music Track selection Use sensors More Features...
Overview Charge stand Headset ([ ]) Volume up/down Track backward Play/pause music Track forward Active noise cancelling Charge port Active call = mute/unmute, call waiting (softphone only). Idle = open mic Headset LEDs Call button ([ ]) Power button Bluetooth pair button...
USB Bluetooth adapter USB LEDs What they mean Red and blue flashes Pairing Solid Blue Pairing successful; Connected Blue flashes On a call Solid red Mute active Purple flashes Streaming music/media from computer...
NOTE Plantronics Hub software allows you to customize your headset's behavior through advanced settings and options. Pair your headset To put your headset in pair mode, press and hold the power button towards the Bluetooth icon until you hear "pairing"...
Fit and charge Right or left To position the microphone on the right or left side, rotate the microphone boom up and over. Adjust the boom so it points to the corner of your mouth. Your headset is smart enough to know what side you are wearing it on and all headset controls including L/R audio channels will switch with your boom side preference.
Load Plantronics Hub for Windows and Mac by visiting plantronics.com/software. Customize your headset Manage your headset settings by downloading Plantronics Hub for Windows and Mac on your computer or Plantronics Hub for iOS and Android on your phone by visiting plantronics.com/software.
If you have muted an active call and you start to speak, a voice prompt or toast reminds you that you are on mute. Manage your mute settings and mute alerts by downloading Plantronics Hub for Windows and Mac at plantronics.com/software...
Use sensors Smart sensors respond when you put on or take o your headphones. With active sensors putting on the headset will: taking off the headset will: Call answer the call mute the headset Music/media resume music/media (if playing pause music/media (if playing) previous to taking o ) Mute unmute if on an active call...
More Features DeepSleep Mode If you leave your headphones powered on but out of range of your paired phone for more than 7 days, your headset conserves its battery power by entering into DeepSleep mode. Once back in range with your phone, press the Call control button to exit DeepSleep mode.
FCC statement · This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 13
NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. IC Radiation Exposure Statement for Canada This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
2014 Plantronics, Inc. Plantronics and Simply Smarter Communications are trademarks of Plantronics, Inc., registered in the US and other countries. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics is under license. All other trademarks are the property of their respective owners.