Safety Precautions; Getting Started - Brother P-touch Embellish User Manual

User's Guide
Thank you for purchasing Brother's P-touch Embellish!
Use your new Brother P-touch Embellish, a ribbon and tape printer,
to create a wide variety of custom, self-adhesive labels and ribbons.
This ribbon and tape printer uses Brother TZe tapes. TZe tape
cassettes are available in many color and sizes. For a complete
list of tapes compatible with your machine, visit us at:
www.brother.com.
Please read this guide, including all Precautions, before using
this machine. After reading this guide, keep it in a safe place.
Printed in China
D00NU2001
1

GETTING STARTED

Installing Power Supply and Ribbon Cassette or Tape Cassette
1
Cassette
Cover
With the LCD facing down, open the
Cassette Cover by pressing the grooved tab
and pushing in the direction of the arrow, as
illustrated.

Safety Precautions

WARNING
Follow these guidelines to avoid the risk of fire, burns, injury, electric
shocks, rupture, overheating, abnormal odours or smoke.
• Always use the specified voltage and the suggested AC Adapter (AD-24ESA) for the
P-touch ribbon/tape printer to prevent any damage or failure.
• Do not touch the P-touch ribbon/tape printer during a lightning storm.
• Do not use the P-touch ribbon/tape printer / AC Adapter in places of high humidity
such as bathrooms.
• Do not overload the power cord.
• Do not place heavy objects on, or damage the power cord or plug. Do not forcibly
bend or pull the power cord. Always hold the AC Adapter when disconnecting from
the power outlet.
• Make sure that the plug is fully inserted to the power outlet. Do not use an outlet that
is loose.
• Do not allow the P-touch ribbon/tape printer / AC Adapter / power plug / batteries to
get wet, for example, by handling them with wet hands or spilling beverages on to
them.
• Since loss of eyesight may result when leaked fluid from batteries gets into your eyes,
immediately rinse your eyes with a large amount of clean water, and then seek
medical attention.
• Do not disassemble or modify the P-touch ribbon/tape printer / AC Adapter /
batteries.
• Do not allow a metal object to contact both the plus and minus ends of a battery.
• Do not use sharp objects, such as tweezers or a metallic pen, to change the batteries.
• Do not throw the batteries into fire or expose to heat.
• Disconnect the AC Adapter and remove batteries immediately and stop using the
P-touch ribbon/tape printer if you notice abnormal odor, heat, discoloration,
deformation or anything unusual while using or storing it.
• Do not use a damaged or leaking battery as the fluid may get on your hands.
• Do not use a deformed or leaking battery or one whose label is damaged. There is a
possibility of generating heat.
2
Print Head
Tape Cutter
Lever
When replacing batteries or tape
cassettes, make sure the power is
turned off.
This ribbon/tape printer requires six (6)
AAA alkaline batteries or six (6) fully-
charged Ni-MH batteries, not included.
Indicates a potentially hazardous
situation which, if not avoided,
could result in death or serious
injuries.