Handle With Care; Correct Disposal Of This Product; Gas Cylinder - Napoleon PRO285X Instructions Manual

Hide thumbs Also See for PRO285X:
Table of Contents

Advertisement

Available languages

Available languages

Handle With Care

CAUTION!
misalignment of internal components. Although this grill has been designed with mobility in mind,
rough handling or abuse will result in damage to internal components, preventing your grill from
operating properly.

Correct Disposal Of This Product

This marking indicates that this product should not be disposed with other household wastes throughout
the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable reuse of material resources. To return your used device,
please use the return and collection systems or contact the retailer where the product was purchased.
They can take this product for environmental safe recycling.

Gas Cylinder

Use only gas cylinders, which meet national and regional codes. For optimal performance the grill should
be operated on propane. Ensure that the cylinder can provide enough fuel to operate the appliance. If in
doubt, check with your local gas supplier.
Use caution when handling the cylinder valve.
Never connect a cylinder, which does not meet local codes.
Spare cylinders must not be stored in close proximity of an operating unit. Cylinders must not be
exposed to extreme heat or direct sunlight.
WARNING!
unit. Hoses that contact high temperature surfaces may melt and leak, causing a fire.
Cylinder Connection: Ensure that the gas regulator hose is kink free. Remove the cap or plug from the
cylinder fuel valve. Tighten regulator to cylinder valve. Leak test all joints prior to using the barbecue. A
leak test must be performed annually, and each time a cylinder is hooked up, or if a part of the gas system
Example Cylinder
318 mm
Gas Hose
If the hose and regulator are not included by the manufacturer, then only hoses and regulators which
meet national and regional codes are to be used.
Ensure that the hose does not come into contact with grease, other hot drippings, or any hot surfaces
on the appliance.
Check hose regularly. In the case of rips, melting or wear, replace hose before using the appliance.
The recommended hose length is 0.9m. The hose must not be longer than 1.5m.
Ensure that the hose is twist and kink free when installed.
Replace the hose before expiry date printed on the hose.
N415-0437CE-GB-DE OCT 23.17
Use care when handling or transporting your grill to prevent damage and
Ensure that the hose is routed to maintain proper clearance to the underside of the
is replaced.
580 mm
5
EN
www.napoleongrills.com

Advertisement

Table of Contents
loading

Table of Contents