4-2 Self-Diagnostic Function of Pickup Defective
This unit can confirm the laser diode current value (DVD: 650nm,
CD: 780nm) of pickup on the Test Mode screen.
(Press the ESC
TEST keys in order on the remote control unit
→
RC-627 to enter the test mode.)
It's effective in case of the following condition.
Symptom
• Indicates "No Disc" in FL display.
• Player does not playback, etc..
Procedure of Self-Diagnosis
1. Enter the Test mode.
2. When diagnosing the 650nm laser diode:
Press the TEST
1 keys in order, and turn on the laser diode
→
(It light-up for nine seconds.).
When diagnosing the 780nm laser diode:
Press the TEST
4 keys in order, and turn on the laser diode
→
(It light-up for nine seconds.).
When let it turn on once again after performed step 2 once,
After pressed REP.B key once
650nm: Press the TEST
1 keys in order
→
780nm: Press the TEST
4 keys in order
→
3. Confirm the indicated value of the laser diode current (LDI).
(Refer to following figure.)
4. When indicated value is more than 100, pickup is defective.
Replacement is necessary
→
Replace the Traverse Mechanism Assy.
When a DVD disc or a CD disc is played in the test mode, this
●
function is effective.
Laser diode current value
レーザーダイオード電流値
Character in bold : Item name
太字:項目名
□:情報表示部
Test Mode Screen Display
テストモード画面
4-2 ピックアップ不良自己診断機能
本機はテストモード画面でピックアップのレーザーダイオード電
流値 (DVD:650nm, CD:780nm) をそれぞれ確認すること
ができます。
(本機をテストモードに入れるには、リモコンRC-627のESC →
TESTキーを順に押してください。 )
下記の症状時に有効です。
症状
•
FLに "No Disc" と表示する時がある
•
PLAYしない、など
自己診断方法
1. テストモードに入れる。
2. 650nmレーザーダイオードを診断する場合はTEST → 1キー
を順に押し、レーザーダイオードを点灯させる。 (9秒間点灯)
780nmレーザーダイオードを診断する場合はTEST → 4キー
を順に押し、レーザーダイオードを点灯させる。 (9秒間点灯)
2項を1回行った後に再び点灯させる場合は、1度REP.Bキー
を押した後に
650nmはTEST → 1キーを順に押す
780nmはTEST → 4キーを順に押す
3. レーザーダイオード電流 (LDI) 表示値を確認する。 (下図参照)
4. 表示値が100以上ならピックアップ不良 → 要交換
トラバースメカを交換してください。
テストモードでDVDディスク、CDディスクを再生している
●
ときにも有効です。
: Information display
−16−