Table of Contents
Advertisement
FIG–5: BATTERY ACCESS & INSTALLATION:
(A)
1
. Hold the radio as shown above (A).
2
. Use your thumbnail to open the
Door Latch, as shown below (B).
3
. Lift and rotate the Battery Access
Door to release it (C).
(B)
BOTTOM VIEW OF THE RADIO
LATCH
CLOSED
LATCH
Drop-in Charger
OPEN
Contacts
page 3
RITRON, INC. 1-800-USA-1-USA (1-800-872-1872)
page 8
Have questions? Call 1-800-USA-1-USA (1-800-872-1872) or visit our website at www.ritron.com
BATTERIES
BATTERY ACCESS
DOOR
DOOR LATCH
(C)
Battery
A c c e s s
Door
4
. Use the Pull-tab to pull the battery
pack out of the case (D).
5
. Insert the replacement battery
pack, being certain to POSITION IT
RELATIVE TO THE CASE AS
SHOWN IN (D). Push the Battery
Pack in as far as as possible.
6
. Replace the Battery Access Door.
Secure it by closing the Door Latch
as shown in (B).
7
. Be certain to firmly lock the Door
Latch, as shown in (B).
-
PULL
TAB
(D)
OPTIONAL CHARGING ACCESSORIES:
Spare/ Replacement
Battery Pack
Drop-in Battery Charger
with spacer
JOBCOM JMX Accessories:
BPJS-6N ....................... 700 mAH Spare Battery Pack
BPJS-AD ....................... Drop-in Charger Adapter
Quad Charger .............. 4-Unit Gang Charger
PATRIOT SST Accessories:
BPS-6N-SC ................... 800 mAH Spare Battery Pack
BPS-6N-MH ................... 1500 mAH Spare Battery Pack
BCPS-AD ...................... Drop-in Charger Adapter
BCC-PS ........................ Drop-in Charger/ Conditioner
See Accessories on page iv.
Advertisement
Table of Contents
