Knob Assign - Kawai MP7SE Owner's Manual

EDIT Menu parameters
7

Knob Assign

The Knob Assign screen is used to assign MIDI Control Change or Aftertouch messages to the four main control
knobs A, B, C, and D for direct, real-time adjustment in Play Mode. Two groups of knob parameters (primary and
secondary) can be assigned to each of the four zones, providing extensive control over external MIDI devices.
 Assigning MIDI CC/Aftertouch messages to each knob
Enter the Knob Assign screen for the desired section.
Turn the four control knobs (A, B, C, D) to specify which MIDI CC
message should be assigned to each control knob.
MIDI CC messages can also be assigned by using the CURSOR
buttons to move the selection cursor, and +/YES or –/NO
buttons to increase or decrease the values.
 arrow:
Next page
Press the F1~F4 buttons (depending on the selected zone)
to show the secondary group of knob parameters in the LCD
display.
* For more information about adjusting parameters in Play Mode, please
refer to page 26.
62
(EXT mode)
Page 1/2
Page 2/2