Configuring A Dynamic Ip Address - MSI MS-6807 User Manual

Wireless 11b PCI Card User's Guide
Click here
Click here
5. Select Microsort, then scroll down to select TCP/IP.
Click Have Disk to install TCP/IP from a spicified drive
(for Windows
2000/XP).
Please prepare a copy of the Windows
2000/XP installation disk/CD at hand if needed.
Now TCP/IP installation is finished.

5.3 Configuring a dynamic IP address

When the drivers are installed, the default setting here is
set to obtain IP dynamically through a DHCP server. If
you'd like check or change the settings, please follow
the steps below:
1. Go to Start -> Settings -> Control Panel.
® 98SE/ME) or click OK (for Windows ®
® 98SE/ME/
31