Setting The Clock/Setting And Using The Alarms - iHome iBT231 Instruction Manual

Setting the Clock
1. Press and hold the Sleep/Clock Adjust Button for 2 seconds until the clock
display flashes and a beep sounds.
2. Press the or Buttons to adjust the clock to the current time (hold for
rapid setting). Make sure you set the correct AM/PM time. The AM and PM
indicators appear to the left of the display.
3. Press the Sleep/Clock Adjust Button to confirm the time. The year will flash on the display.
4. Press the or Buttons to adjust the clock to the current year (hold for
rapid setting).
5. Press the Sleep/Clock Adjust Button to confirm the year. The date and month will flash on
the display.
Buttons to adjust the clock to the current date and month
6. Press the or
(hold for rapid setting).
Press the Sleep/Clock Adjust Button to confirm the date and month and exit clock setting
7.
mode. 2 beeps will confirm clock setting is complete.
TIP: To toggle the clock display between standard 12 hour time and 24 hour ("military") time
Alarm Button or
display, press the
clock setting.
Setting and Using the Alarms
This unit features dual alarms which can be set to di erent times and alarm sources. Each is set
in the same way. Instructions are given as "Alarm Button"; use
Button to set respective alarms.
Note: Each step must be completed while display is flashing or step will time-out with any
changes saved.
Using the
Alarm Button while the display is flashing during
Alarm Button or
7
P8
iBT231
Alarm