Installing The Right External Fan - Dell EMC PowerEdge T640 Installation And Service Manual

NOTE: The procedure to remove the left external fan is similar to removing the right rear fan.
1 Follow the safety guidelines listed in
2 Remove the GPU air shrouds.
3 Remove the air shroud.
.
Steps
1 Disconnect the fan cable from the system board.
2 Using the Phillips #2 screwdriver, loosen the captive screws that secure the fan to the system.
3 Lift the fan away, while guiding the fan cable through the cable vent.
Figure 42. Removing the right external fan
Next step
Install the right external fan.
Related link
Removing the optional GPU air shrouds
Removing the air shroud

Installing the right external fan

Installing the right external fan
Prerequisite
NOTE: The procedure to install the left external fan is similar to installing the right rear fan.
Follow the safety guidelines listed in
Steps
1 Guiding the fan cable through the cable vent, install the external fan over the PCIe slots.
2 Using the Phillips #2 screwdriver, secure the fan in place.
3 Connect the fan cable to the connected on the system board.
Safety instructions.
Safety instructions.
Installing and removing system components 97